Analog Brave NUDV intercom
analog door phone
- IP network camera - video transmission from the door intercom via LAN network
- currently, an optional camera module with an APTI-RF42MA-28 IP camera is implemented
- IP42 rating
- the modular system allows you to connect 1 to 99 buttons including a dialing/access code keyboard
- voice communication is powered only by the telephone line
- pulse and tone (DTMF) dialing
- two 24-digit numbers below each key (including *, #, Flash, and pause)
- switching Day / Night by DTMF code or automatically according to the internal clock RTC - weekly program (additional module)
- option to extend the call by selecting * or #
- possibility to connect two independent locks for opening the door
- 8 switch modes can be used (eg additional bell, gradual opening)
- two codes for hanging up the intercom from the phone
- two codes to open the door from the phone for 1 pulse and two codes for 2 pulses
- 3 x 6 code locks for each switch (password from door buttons)
- possibility to connect an electrically secured lock to the first switch (activation by serial code)
- possibility to connect an exit button
- possibility to hang up by pressing the same button again
- option to turn on baby call mode (does not dial)
- option to turn on DTMF reception suppression from the microphone
- option to turn on ticking in the call for call resolution
- possibility to turn on the acoustic signaling of relay closing
- optional number of rings before answering an incoming call
- adjustable parameters of tone dialing, Flash length, and Pause
- adjustable acoustic signaling parameters
- adjustable tone detector parameters
- electronic volume adjustment without having to open the cover
- possibility of permanent power supply from an external 12V source
- easy HW setup with DIP switch
- corporate settings in several levels
- programming is possible in addition to remote DTMF also by direct connection to a personal computer (USB)
- integrated PCB heating with regulation
- switchable business card illumination
- ground terminal for better protection against static electricity